Zippy Technology GIN-3500V Power Supply Unit Battery And Power Supply

- TEMPERATURE RANGE：OPERATING 0℃～40℃, STORAGE -20℃~80℃
- HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
- DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 60 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 60 SECOND
- EFFICIENCY：TYPICAL >82% AT 115VAC, 20%~100% MAX LOAD
- POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS
- OVER POWER PROTECTION：110% ~ 180%
- OVER VOLTAGE PROTECTION：+12V-13.3V～14.3V
- LEAKAGE CURRENT: 3.5MA MAX AT NOMINAL VOLTAGE 250VAC
- SHORT CIRCUIT PROTECTION：SHUT DOWN AND LATCH OFF
- EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
- SAFETY: TO MEET UL, CUL, TUV, CCC
- REMOTE ON/OFF CONTROL
- THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY).
- AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
- N+1 REDUNDANCY FUNCTION
- HOT-SWAPPABLE FUNCTION
- CURRENT/BALANCE LOAD SHARING DESIGN
- ISOLATION: BUILT-IN IN POWER MODULE
- POWER FACTOR CORRENTION: ACTIVE (MEET IEC-1000-3-2)
- COOLING: 40mm DC FANS (one module)