Water 3.0 240 ARGB Sync Edition
Thermaltake Water 3.0 240 ARGB Sync Edition comes with two 120 mm fan with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Pure ARGB fan features compression blades, hydraulic bearing, and 16.8 million colors LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome software. Water 3.0 ARGB Sync Edition Series allows users to enjoy better cooling performance and greater CPU protection!
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Pure 12 ARGB Sync Radiator Fan
Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.
Switch LED Modes with ARGB Controller
The ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speeds options.
High Efficiency Radiator
Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation.
High Performance Waterblock
The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.
High Quality Pump
The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.
Easy Installation
Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.
Thermaltake CL-W233-PL12SW-A Computer Cooling System Computer Component
Product Name:
Brand:Thermaltake
Part Number (MPN):
GTIN (EAN/UPC):
Categories:
CPIN:
Item Overview
Delivery Options
Return & Warranty
Reviews
Loading...
Description
Product Features:
- Processor All-in-one liquid cooler
- Supported processor sockets: LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket FM2
- 56.45 cfm 1.59 mmH2O
- Pulse-width modulation (PWM) support
- 120 x 120 x 25 mm
- Black, Multicolour
Thermaltake Water 3.0 240 ARGB Sync Processor All-in-one liquid cooler Black, Multicolour
Copper, 3600 RPM, PWM 500~1500 R.P.M, 56.45 CFM, ARGB
Thermaltake Water 3.0 240 ARGB Sync, All-in-one liquid cooler, 56.45 cfm, Black, Multicolour
Thermaltake Water 3.0 240 ARGB Sync. Type: All-in-one liquid cooler, Maximum airflow: 56.45 cfm, Maximum air pressure: 1.59 mmH2O. Product colour: Black, Multicolour
Specification
Performance
Design
Power
Weight & dimensions
Packaging content
Other features
Logistics data
Buying Reasons
WATER 3.0 ARGB 240
The Water 3.0 ARGB Sync CPU cooler, is an all-in-one cooling solution that is available in either 120mm, 240mm or 360mm variants. Able to provide an alternative cooling solution to standard air cooling, the Water 3.0 is a perfect fit for achieving higher performance in any system. It’s also a fantastic choice for those that can’t get enough RGB lighting in their build; thanks to the included Pure ARGB 5 volt radiator fans, switching between different lighting effects and colour options has never looked this good.
KEEPING COOL UNDER PRESSURE
When it comes to optimizing PC performance, keeping your components cool should always be a priority. A CPU is the beating heart of any gaming system, and is always going to require the best cooling hardware in order to help support it. By utilizing an all-in-one liquid cooler such as the Water 3.0, the truest potential of your CPU can be fully realized. Over-clocking is something that can only be achieved through a liquid cooling solution, allowing your system to achieve even higher performance targets. You can also rest easy knowing that when you use the Water 3.0, it will help in eliminating any risks of damage to your hardware that can sometimes cause due to inefficient cooling be applied from stock cooling methods.
JUST BE COOL
Making sure your components always receive the right amount of cooling, should always be a priority when it comes to deciding on which case to house your system. Which is why we’ve endeavored to give you plenty of cooling options in the View 27. Whether you’re just starting out and want to play it safe by just utilising fan cooling, or you’re a bit more adventurous and want to try your hand at a liquid cooling loop; the View 27 offers plenty of space for any and all of these cooling solutions and more.
EVERYTHING UNDER YOUR CONTROL
Speaking of addressable LED fans, you’ll have total freedom when it comes to personalisation. With over 16.8 million colours to choose from, the only limitation is your own imagination. Through either software or hardware controls, you can switch between different lighting modes for some truly dazzling effects, to help draw even more attention to your system. As an added benefit, any compatible motherboard software can be synced with the included ARGB fans, allowing for consistent colours across all of your components. If you prefer, you can also use the included fan controller for easy manual adjustments and tweaks. (Only supports motherboard with 5V header)
NEED AN ASSIST?
Sometimes, it helps to have someone who can offer a helping hand if the worst should happen. At Thermaltake, we’re dedicated in providing quality products and even higher quality customer service. With the Water 3.0, we’ve endeavoured to offer a full three years product warranty in order to give you the confidence when deciding to purchase with us. By having a dedicated tech support team based in Australia, we understand how to properly serve our local customers and are able to deliver timely support and assistance.