For support call us at
+442037470227

DELL 210-ABOH Network Switch Networking

Product Name: N3048P

Product Family: PowerConnect

Brand:DELL

Product Series: 3548

Part Number (MPN): 210-ABOH

GTIN (EAN/UPC): 5415247066934

Categories: Network Switches

CPIN:1824904

£176.8
Per unit, single order
Ordering multiple units? Get a custom quote.

Reviews

0.0

0

Reviews

5 Star
4 Star
3 Star
2 Star
1 Star

Loading...

Description

Product Features:

  • Managed L3 SNMP v1/v2/v3
  • Quality of Service (QoS) support
  • Basic switching RJ-45 Ethernet ports quantity: 48 Console port: RJ-45
  • 10G support 1000BASE-T, 100BASE-TX, 10GBASE-T
  • MAC address table: 16384 entries Switching capacity: 260 Gbit/s
  • Access Control List (ACL)
  • 1U Rack mounting Stackable
  • Power over Ethernet (PoE)

Warranty: Limited Lifetime Warranty

DELL PowerConnect N3048P Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Black

48 x RJ45 10/100/1000Mb auto-sensing ports, PoE, 2 x 10GbE SFP+, 2 x GbE SFP combo, 260Gbps, 193Mpps, 1U, 1100W, Black

Modernize your network
N-Series is a family of energy-efficient and cost-effective 1GbE and 10GbE switches designed for modernizing and scaling network infrastructure. The Dell Networking N3000 Series offers high-availability GbE switches for Layer 3 access or aggregation, providing easy-to-manage solutions that:

- Use MLAG for multipath loop-free redundancy without spanning tree to enable full-bandwidth utilization and high availability
- Promote greater interoperability through interfaces with Cisco's Rapid Per VLAN Spanning Tree (RPVST+)1 and devices using Cisco Discovery Protocol (CDP)
- Offer a more flexible choice in your network by uniting products with the latest open standard protocols
- Include advanced IPv4 and IPv6 Layer 3 routing, security and scalability features
- Plug-and-play configuration with Dell EqualLogic iSCSI storage arrays with one-command iSCSI setup that alleviates multiple-step configuration and potential configuration errors

Deliver clean power to network devices with PoE+ support
The Dell Networking N3000 Series has options for up to 48 ports of Power-over-Ethernet Plus (PoE+) without an external power supply. This allows you to attach devices with high power requirements (up to 30.8 watts) without running a separate power cable. PoE+ is particularly useful in older buildings where installing power to multiple, widespread locations can be prohibitively expensive.

Designed for efficiency
Built to help keep operating costs down, the N3000 Series can operate at temperatures up to 113°F (45°C) to help reduce cooling costs. Features designed to improve overall efficiency include:

- Hot-swappable 80PLUS-certified efficient power supply with dual power supplies option
- Enough power capacity to provide up to 48 ports of PoE+ (up to 30.8 watts) in a 1U footprint
- Redundant variable-speed cooling fans
- Energy-Efficient Ethernet and low-power PHYs to help reduce power to inactive ports and idle links

Advanced feature set to simplify management
The Dell Networking N3000 Series is designed for easy deployment, outstanding interoperability and a low learning curve for network administrators. A single OS release (Dell Networking OS 6) allows you to maintain consistent configurations across all N-Series products with a comprehensive feature set that includes:
- One common command line interface (CLI) and graphical user interface (GUI) that use a well-known command language to help skilled network administrators become productive quickly
- USB auto-configuration that helps network administrators rapidly deploy mirrored configurations to numerous devices by simply inserting a USB key
- A variety of enterprise-class features with familiar and intuitive configuration and management commands
- The latest open-standard protocols and smart integration technologies to help make smoothly operating multi-vendor networks possible

Deploy with confidence at any scale
With high throughput and capacity to handle unexpected workloads, the N3000 Series switches are ideal Layer 3 solutions for fast growing GbE networks that require high-density aggregation with seamless redundancy and availability.

- Data rates up to 260Gbps (full duplex) and a forwarding rate of up to 193Mpps
- Hot swap expansion module supports dual SFP+ and dual 10GBaseT
- Built-in stacking ports and standard N-Series stacking cables support a stacking architecture up to 12 units at 84Gbps
- Switch stacks up to 624 1GbE ports can be managed from a single screen or IP address

Lifetime Warranty
Protect your investment with a Lifetime Limited Warranty2, which guarantees select Dell Networking products with Basic Hardware Service (repair or replacement) for as long as you own the product.

Dell ProSupport
Choose Dell’s premium support service, ProSupport, for 24/7 direct telephone and online access to advanced-level technicians based in your region. Whether you have one office or hundreds around the world, protect your investments with this simple yet flexible approach.

Dell Financial Services
Are financial or operational barriers preventing you from acquiring the technology you need? Whether you’re looking for payment flexibility to spread IT costs over several budget cycles or you need a scalable financial solution to accommodate your changing technology needs, Dell Financial Services has a wide range of contracting options designed to make technology acquisition easy and affordable. To learn how financing can help you maximize ROI and lower TCO, contact your Dell account manager or DFS representative.

DELL PowerConnect N3048P, Managed, L3, Gigabit Ethernet (10/100/1000), Power over Ethernet (PoE), Rack mounting, 1U

DELL PowerConnect N3048P. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48, USB 2.0 ports quantity: 1, Console port: RJ-45. Full duplex. MAC address table: 16384 entries, Switching capacity: 260 Gbit/s. Networking standards: IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE.... Power connector: DC-in jack. Power over Ethernet (PoE). Rack mounting, Form factor: 1U

Specification

Management features

Switch type
Managed
Switch layer
L3
Quality of Service (QoS) support
Yes

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity
48
Basic switching RJ-45 Ethernet ports type
Gigabit Ethernet (10/100/1000)
SFP+ module slots quantity
2
Console port
RJ-45
USB 2.0 ports quantity
1
Power connector
DC-in jack

Network

Networking standards
IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support
Yes
Copper ethernet cabling technology
1000BASE-T, 100BASE-TX, 10GBASE-T
Port mirroring
Yes
Full duplex
Yes
Flow control support
Yes
Link aggregation
Yes
Broadcast storm control
Yes
Auto MDI/MDI-X
Yes
Spanning tree protocol
Yes
VLAN support
Yes
Number of VLANs
4094

Data transmission

Switching capacity
260 Gbit/s
Throughput
193 Mpps
MAC address table
16384 entries
Packet buffer memory
4 MB

Security

Access Control List (ACL)
Yes

Multicast features

Multicast support
Yes

Protocols

Management protocols
SNMP v1/v2/v3
Supported network protocols
IPv4, IPv6

Design

Rack mounting
Yes
Stackable
Yes
Form factor
1U
Product colour
Black
Number of fans
2 fan(s)

Performance

Internal memory
1024 MB
Flash memory
256 MB

Power

Redundant power supply (RPS) support
Yes
Number of power supply units
1
Power consumption (typical)
2145 W

Power over Ethernet (PoE)

Power over Ethernet (PoE)
Yes
Power over Ethernet (PoE) power per port
30.8 W

Operational conditions

Operating temperature (T-T)
0 - 45 °C
Storage temperature (T-T)
-40 - 65 °C
Operating relative humidity (H-H)
5 - 95%
Storage relative humidity (H-H)
5 - 85%
Heat dissipation
3113.33 BTU/h

Weight & dimensions

Width
434 mm
Depth
407 mm
Height
43.5 mm
Weight
6.9 kg

Buying Reasons

Modernize your network

The N3000 Series offers high-availability GbE switches with easy-to-manage solutions that:


Use MLAG for multipath loop-free redundancy without spanning tree to enable full-bandwidth utilization and high availability
Promote greater interoperability through interfaces with Cisco's Rapid Per VLAN Spanning Tree (RPVST+) and devices using Cisco Discovery Protocol (CDP)
Offer more flexibility by uniting products with the latest open standard protocols
Include advanced IPv4 and IPv6 Layer 3 routing, security and scalability features
Have plug-and-play configuration with Dell EqualLogic iSCSI storage arrays; one-command iSCSI setup alleviates multiple step configuration and potential configuration errors
Support full bandwidth Wave 2 wireless with 2.5/5GbE ports on the N3132PX-ON

Designed for efficiency

Built to help keep operating costs down, the N3000 Series can operate at temperatures up to 113°F (45°C) to help reduce cooling costs. Features designed to improve overall efficiency include:


Hot-swappable 80PLUS-certified efficient power supply with dual power supplies option
Enough power capacity to provide up to 48 ports of PoE+ (up to 30.8 watts) in a 1U footprint
Redundant variable-speed cooling fans
Energy-efficient Ethernet and low-power PHYs to help reduce power to inactive ports and idle links

Advanced feature set to simplify management

The Dell Networking N3000 Series is designed for easy deployment and outstanding interoperability. A single OS release (Dell Networking OS 6) allows you to maintain consistent configurations across all N-Series products with a comprehensive feature set that includes:


One common command line interface (CLI) and graphical user interface (GUI) that use a well-known command language to help skilled network administrators become productive quickly
USB auto-configuration that helps network administrators rapidly deploy mirrored configurations to numerous devices by simply inserting a USB key
Enterprise-class features with familiar and intuitive configuration and management commands — plus the latest open-standard protocols and smart integration technologies to help make smoothly operating multi-vendor networks possible.

Deploy with confidence at any scale

With high throughput and capacity to handle unexpected workloads, the N3000 Series switches are ideal Layer 3 solutions for fast-growing GbE networks that require high-density aggregation with seamless redundancy and availability.


Data rates up to 260Gbps (full duplex) and a forwarding rate of up to 193Mpps
Hot-swap expansion module supports dual SFP+ and dual 10GBaseT
Built-in stacking ports and standard N-Series stacking cables support a stacking architecture up to 12 units at 84Gbps
Stacks up to 624 1GbE ports can be managed from a single screen or IP address
Eight multi-gig (2.5/5GbE) RJ45 ports on the N3132PX-ON

Media

Disclaimer

Actual configuration might differ from illustration